Product material:
Panel: The panel is anti-slide/ordinary wood (30mm thick) + carpet
Face frame: thickness 30mm thick
Support: pipe diameter 12mm* thickness 2mm (aluminum alloy pipe surface silver oxide, black: nylon material)
Product specifications:
1.22x1.22m, 1.22x2.44m, 1x1m, 1x2m
The stage height ranges from 0.2m to 1.2m.
Stage ladder size:
Stage ladder for 1x1m,1x2m dragnet stage:
Length 1 m, width 0.36 m, height 0.2 m, 0.4 m, 0.6 m, 0.8 m, 1 m
Stage ladder for 1.22x1.22m,1.22x2.44m dragnet stage:
1.22 meters long, 0.335 meters wide, 0.2 meters, 0.4 meters, 0.6 meters, 0.8 meters, 1 meter high
Product height:
The height cannot be adjusted. Only one height can be fixed. Conventional height
0.2 m, 0.3 m, 0.4 m, 0.5 m, 0.6 m, 0.7 m, 0.8 m, 0.9 m, 1 m, 1.1 m, 1.2 m
Product Packaging:
1X1 and 1.22x1.22 are generally recommended to be packed in air cases, which can provide protection for the dragnet stage and facilitate transportation.
The size of 1X2 and 1.22x2.44 is too large to be convenient for aviation cases, they are packed with bubble film and paper. This size is not easy to handle because of its large volume and weight.
Product use:
Generally suitable for indoor banquet hall, exhibition hall and other flat ground places. Foldable, transportation space saving, light weight.
Product Description:
Each square can bear 500-600kg (the specific bearing capacity depends on the wood used for the stage, such as the factory 18mm thick construction plywood, which has been tested to bear 1000kg per square)
The black plastic piece on the stage has a circular hole in the center to pin the tiled board above
A plate connector is provided between the board and the board, which can connect multiple single stage into a whole. If the stage is on the high side and still reaches 1 meter, it can be equipped with a bracket connector to connect the brackets together
The connection mode between the support tube of the stage and the nylon connector: the round tube tiled below the stage is fixed inside the slot of the nylon connector
The stage is made of aluminum alloy pipe, which is durable and reliable in bearing capacity. Powerful function, quick installation, convenient freight, affordable.
Product features:
1.
Net stage construction is convenient, fashionable and durable, stable atmosphere, more wear-resistant, large weight
2.
The smallest volume in the stage, convenient for customers to use flexibly, T net stage construction, square stage construction, rectangular stage construction, all kinds of modeling, can be built
3.
Dragnet stage frame, 100 square meters of stage, only need 20 minutes, can unfold more than 100 square meters of stage, greatly save labor, time cost
Support tube 12mmx2mm thickness, aluminum alloy tube surface silver oxide, black: nylon material. The thickness of the panel is 30MM. The above fulcrum is designed to bear 2 tons. Each panel has two panel locks, the other two are without panel locks
When the stage is low, it can be matched with bracket links. Generally, it is higher than 1 meter before bracket links are matched. According to one stage, the ladder must be matched with bracket links
Nylon (Polyamide, PA for short) is a plastic made of a Polyamide resin. This kind of resin can be made by polycondensation of binary amine and diacid, or by ring-opening polymerization of lactam formed after dehydration of amino acids. The molecular formula is: [NH (CH2) M NHCO (CH2) N-2 CO] N [NH (CH2) N-1 CO] N PA is mainly used for household electrical components, electronic and mechanical and electrical industry products such as plugs, wires, etc. Also used in the production of automobile and instrument parts, sports goods, pipelines, medical equipment, nylon tape, nylon film and fabric, etc. Unlike PS, PE and PP, PA does not soften gradually with the increase of heating temperature, but in a narrow temperature range close to the melting point, the melting point is obvious, once the temperature reaches the flow.
The main advantages of PA (Nylon) performance are:
1. High mechanical strength, good toughness, high tensile and compressive strength. The tensile strength is close to the yield strength, more than twice as high as ABS. The absorption capacity of impact and stress vibration is strong, and the impact strength is much higher than that of general plastics, and better than acetal resin.
2. Outstanding fatigue resistance, parts after repeated bending can still maintain the original mechanical strength. PA is often used in situations where periodic fatigue is very obvious, such as escalator handrails and new bicycle plastic rims.
3. Smooth surface, small friction coefficient, wear-resistant. As active mechanical components have self-lubrication, low noise, in the friction action is not too high can not add lubricant use; If you really need to use lubricant to reduce friction or help heat dissipation, water, oil, grease, etc.
4. Corrosion resistance, very alkali and most salt liquid, but also resistant to weak acid, oil, gasoline and other solvents, aromatic compounds is inert, can be used as lubricating oil, fuel and other packaging materials.
5. Inert to biological erosion, with good antibacterial and mildew resistance.
6. Heat resistant, wide operating temperature range, can be in -450C to +1000C long-term use, short-term tolerance temperature up to 120-1500C.
7. Excellent electrical performance. It can be used as working frequency insulation material in dry environment, and has good electrical insulation even in high humidity environment.
8. Light weight, easy to dye, easy to shape. Because of low melt viscosity, can flow quickly. Easy to mold filling, high freezing point after mold filling, can be quickly shaped, so the molding cycle is short, high production efficiency.
